Table of Contents
During hot summer, a swimming pool can provide relief from sun heat and give kids and adults endless hours of fun. If you are looking forward to putting a pool in your backyard but do not have enough space or money for a conventional pool? A metal frame pool may be the answer. This pool allows you to enjoy summer without all the hustle and cost of the major construction project. There are a ton of benefits of having a metal frame pool including better safety, easy maintenance, low cost, and fast installation. Otherwise, If you’ve got one of these pools, though, you must keep it in good shape by knowing how to use and clean it properly. Here’s how to install and care for your metal frame pool.
What Is Metal Frame Pool
Before we dive into how to use and clean your metal frame pool, it’s important to understand what exactly a metal frame pool is. A metal frame pool is an above-ground swimming pool that features an aluminum or steel framework for reinforcement. These pools are often chosen by consumers because they are easy to assemble and easier to take down than a traditional concrete pool. They come in round-shaped or rectangle-shaped designs and they consist of numerous powder-coated metal bars. They also come in a wide range of sizes making them great for families to enjoy swimming right at their home.
How to Install a Metal Frame Pool
Installing a metal frame pool is very simple, however, some models need some human power. Before you purchase any metal frame pool, make sure it has an instruction guide to help you install it easily. Here are some steps:
1. Prepare the Foundation: The first thing you need to do is to prepare a foundation. In case you want to use the pool for several days or months, you require to remove any weed or grass that is growing where you will place it. This may not be very important in case you are installing a pool that has a resin or metal base, but if it has a vinyl base, then some stuff can grow through it.
2. Level the Foundation: After you prepare the foundation, then the area might require to be leveled. This is because you will put water on the pool and an unleveled surface can damage the walls or lining by causing them to shift. Also, uneven surfaces can make water accumulate on one side and this can cause tearing or corrosion. Some pools require you to lay sand or paddle underneath them.
3. Sturdy the Foundation: The next step is to strengthen the foundation of the frames. The post will require solid materials such as stones to support them. This will help to reduce instability and shifting.
4. Assemble the Frame: This is probably the easiest process. After you take care of the foundation, then just follow the manufacturer’s directions for you to put down the frames together.
5. Assemble the Walls & Liner: Depending on the type of pool that you have, assemble the walls and liner or just the liner, inside the frame. Also, this step requires you to check the instruction guide from the manufacturer’s guide that comes with the pool. You may be required to punch out perforated holes for pins and skimmer. Or it can include overlapping liners on some pools. Make sure that the materials are smooth at the pool bottom and ensure that it is wrinkle-free.
6. Fill the Pool with Water: After you fully assemble the pool, fill it with water. You can do this in several ways. It is recommended to use a garden hose, but this depends on the pool size and some may take some time. Whenever you are using a hose, it is important to use a hose filter to filter debris and keep water out of excess minerals and chlorine that might be found in the water source. You can likewise lease a water truck service to fill the pool with water. If you are working with a large pool kit, you might take 2 to 3 people to assist you with the job.
Tips to Keep Your Pool Clean
A properly maintained pool will run more efficiently, with fewer problems. A clean pool is also a safe pool, as contaminants from leaves and other debris can pose a threat to swimmers. For these reasons, you’ll want to be sure that your metal frame pool gets cleaned regularly—preferably once per week. To perfectly clean your pool, you need to have a pool pump, pool brush, pool cover, filter, pool skimmer, and chlorine. Here are some tips to maintain your pool cleanness.
Always measure the pH value in your pool: It is important to test and maintain the metal frame pool pH to keep the water crystal clear. The pH level in your pool should be between 7.2 and 7.6, so using a test kit is always wise. You can easily check the swimming pool pH value with the help of test strips. If you see the pH level is too high, then it means that lime deposits and algae formation can occur. You need to add pH minus to minimize the pH value.
Regularly Clean and Replace the Filter: It’s important to regularly clean your filter. Doing so will improve water flow, help reduce debris buildup in your pool, and extend filter life. If you notice debris building up on or around your filter, it’s time for a replacement.
Skim the surface of the water: Though many pool owners overlook it, your swimming pool’s surface should be skimmed regularly. Not only will removing a thin layer of debris from your pool’s surface help improve water quality, but a clean surface is easier on your eyes as well. Be sure to also check the bottom of the pool for any moss or algae growth: these should be removed before they can spread.
Do Weekly Shock Treatments: Regularly shock-treating your pool, whether it’s made of metal or not, will help extend its life. You can do a shock treatment by either simply tossing some non-chlorine shock into your pool or by getting a chlorine generator system. Both are equally effective for killing bacteria and algae that have been feeding on the body fluids left behind by swimmers. After shocking your pool with chlorine, you should test the water to make sure it’s clean before swimming in it again. Shock treatments should be done at least once per week depending on how much activity is happening in the pool. If you’re swimming every day then weekly shock treatments are recommended.
Vacuum Often: Be sure to vacuum your pool’s floor as often as possible. As you swim, dirt, hair, bugs, and other tiny objects fall into your pool’s surface. Over time, they build up in a layer that needs frequent cleaning to keep your water healthy. For high-traffic pools—ones used by multiple people for extended periods, we recommend vacuuming your pool at least twice per week.
Conclusion
We have discussed all the steps that you need to take to install your metal frame pool as well as some things to do to keep it clean. These tips may help make your installation process easier, and make sure you enjoy years of fun in your new pool.
Leave a Reply