Table of Contents
One of the best ways to ensure you get an impressive catch is to spool your spinning reel correctly. This eliminates the chances of forming tangles and twists on the fishing line. This article will teach you how to prepare for your next fishing adventure and why you need to buy a fishing line spooler.
The article addresses a step-by-step guide on how to spool line onto a spinning reel. The process is simple and will ensure that you become an advanced angler. Let’s get started.
How to Spool Line onto a Spinning Reel?
Step 1: Make sure unspooling will be counterclockwise
The first step in preventing the formation of twists is to make sure that your fishing line will unwind counterclockwise. Therefore, get a table or any other flat surface and place your fishing line there.
Notice which direction makes the line unwind counterclockwise. Then, when mounting it to the spinning reel, you will wind it in a clockwise direction. Doing this ensures that your fishing line will follow its natural curve when spooling.
Step 2: Run the line perfectly on the fishing rod
Use the fishing rod’s bottom eye to run the line. This is an important step when spooling a fishing line onto a spinning reel. It ensures that the reel starts pulling the line towards the spool in the same way that it will behave when you will cast the spinning reel during the actual fishing.
Failure to prepare early enough for the fishing adventure can make you hurry through the process and forget to do critical things like opening the bail, which later backfires on you when you are already on the fishing ground.
Before having your fishing line around the spinning reel, make sure you open the bail. This saves you a lot of time that you would use to cut the line or untie the knot and then retie it when on the fishing ground. Otherwise, your spinning reel cannot work until the line goes under the bail.
Step 4: Do an arbor knot or overhand knot around your spinning reel spool
Choose between doing an arbor knot and an overhand knot. Different anglers will have various reasons to use either of the two knots. Once you decide which one is best for you, tie it on the spinning reel spool. Remember to clip the line’s tag end. Failure to clip the end will inconvenience you when you start fishing.
Step 5: Close the bail and reel
The ease of doing this will largely depend on the fishing line type that you will be using. For instance, using a braided fishing line is normally a hustle because it easily spins on the spool without necessarily spooling on the reel.
In such a case, take a monofilament backing and use it to prevent the braided fishing line from spinning. It is recommendable that you do a double uni knot when tying a mono line with a braided fishing line.
When reeling, remember to pinch it between the fingers to create a natural resistance. However, be careful not to hurt your fingers, therefore, apply enough pressure on your fingers to ensure that the line spools securely on the reel.
Step 6: Spin the reel to optimum capacity without overloading it
When spooling a spinning reel, it is important for you to load it with only enough lines to match its capacity without overloading it. As a matter of fact, make sure that the bottom part of the spool has about 1/8th inch space left. Overloading your spinning reel will give you a hectic time when you go to the fishing ground as it can form a bird’s nest when you cast your fishing line.
Step 7: Cut the fishing line and install the bait
Once you mount an adequate amount of fishing line on the spinning reel, cut the fishing line. Insert the fishing line through the rest of the rod’s eyes and install your preferred bait.
At this point, now you can leave the house to your fishing ground, ready for a memorable catch.
Spooling a fishing line onto a reel should not be a complicated process if you have the right tools. One of the things you need to do this perfectly is a fishing line spooler. If you are wondering why you need to buy a spooler, there are three critical reasons to keep in mind. They include the following;
- Tension: The best fishing line spooler helps you maintain adequate pressure on the line to properly spool a reel. For you to have a memorable adventure, your reel should be tightly packed and the line should have adequate tension.
- Twist: This is mainly the major reason why you should invest in a fishing line spooler. It spools the line around the reel without developing entanglements, knots, and twists. Hence, the best spooler will let your fishing line spool and flow in a natural direction, regardless of the type of reel you are spooling including spinning and baitcasting.
- Longevity: Fishing line spoolers experience a lot of stress during use because they have to spool hundreds of feet of a fishing line around a fishing reel and maintain an appropriate amount of tension while at it. Therefore, getting one, you need to ensure that you pick one with solid connections and durable construction for enhanced longevity.
Conclusion
If you have been struggling when tying the fishing line around the fishing reel, a spooler will help you make the process more fun. Ideally, it eliminates the need to have a helping hand when doing it, making you self-sufficient. Furthermore, the market also gives you numerous, high-quality fishing line spoolers to choose from.
The options feature budget-friendly options and high-end products to make sure you get one that matches your budget. Spooling a fishing line on a spinning reel is a simple process if you follow the above step-by-step instructions. The process saves a lot of time and helps to make your fishing experience memorable.
Leave a Reply